Sportsman's Metal Treatment Kit     

Microlon Gun Juice is a one-time treatment, unlike any other standard lubricant... a metal treatment that treats the inside of your gun barrel and leaves behind a long-lasting dry-film super lubricant.

Sportsman's Metal Treatment Kit includes: .75 oz Assembly Lube tube 1 oz Gun Juice Call us to at 800-745-6066 to Order Only $16.95

Microlon® FIREARMS TREATMENT
(Handguns, Rifles and Shotguns)

Product -Microlon Liquid Gun Juice

HANDGUN TREATMENT INSTRUCTIONS:

1. Clean the bore of the weapon thoroughly, removing copper, lead and carbon deposits, prior to application of Gun Juice. Microlon Gun Juice is an excellent cleaner, and when used with a bore brush, will remove fouling from your gun's bore, preparing the metal to receive our protective, microscopic dry film lubricant.

2. Before opening the container, SHAKE WELL.

3. Wet a patch with the Microlon Gun Juice and pull it the length of the inside of the barrel.

4. Fire the weapon and pull another patch through the bore.

5. Repeat until 8-10 patches with Microlon Gun Juice have been pulled the length of the barrel.

6. Re-sight the weapon, if possible.

7. Microlon Gun Juice may be applied to the moving parts of the firearm by wiping and polishing the parts with a soft cloth moistened with Gun Juice.

8. Microlon Gun Juice can also be used during routine cleaning and will improve the slide action in a semi-automatic. Drip Gun Juice down along the center rod and spin the cylinder to improve spinning action in revolvers. Remember to remove grips during routine cleaning. Microlon is a metal treatment and may damage a non-metal surface.

RIFLE & SHOTGUN TREATMENT INSTRUCTIONS:

1. Clean the bore of the weapon thoroughly, removing copper, lead and carbon deposits, prior to application of Gun Juice. Microlon Gun Juice is an excellent cleaner, and when used with a bore brush, will remove fouling from your gun's bore, preparing the metal to receive our protective, microscopic dry film lubricant.

2. Before opening the container, SHAKE WELL.

3. Wet a patch with the Microlon Gun Juice and pull it the length of the inside of the barrel.

4. Fire the weapon and pull another patch through the bore.

5. Repeat until 8-10 patches with Microlon Gun Juice have been pulled the length of the barrel.

6. Re-sight the weapon, if possible.

7. Microlon Gun Juice may be applied to the moving parts of the firearm by wiping and polishing the parts with a soft cloth moistened with Gun Juice.

8. Microlon Gun Juice can also be used during routine cleaning. Microlon is a metal treatment and may damage a non-metal surface, so if possible, remove stock and other non-metal parts while cleaning the weapon.

Notes:
Always observe proper gun safety.

When used on firearms, Microlon Gun Juice will provide smoother operation of all moving parts, prevent rust and corrosion, and, when properly applied to the inside of the barrel, Microlon Gun Juice will cause the weapon to fire at a higher muzzle velocity, shoot more consistently and last much longer.

Microlon Gun Juice should be used on all firearms in place of normal gun oil. Microlon Gun Juice is far superior to oils in that it provides excellent lubrication and is a "Dry Film" lubricant that will not attract dirt, dust or grit, which can permanently damage a firearm.

Do not let Microlon Gun Juice stand on finished wood surfaces. Wipe excess liquid from wood surfaces promptly.

Do not leave container open for extended periods as Microlon Gun Juice will evaporate quickly, reducing its penetrating properties.

NOTICE: If you purchased Gun Juice along with Assembly Lube, you may use the Assembly Lube on all sliding parts of a weapon, such as the guides for the slide mechanism on a semi-automatic, or the pump guides of a shotgun. Excess Assembly Lube should be removed with a soft, dry cloth before using the weapon.

If you have any questions call our TOLL FREE NUMBER (800) 745-6066